Q.1 Pilot Does Not Light ?

• Be assured that the gas supply is on at Natural Gas meter or Propane tank.
• While pilot button marked by a single flame is held, make sure certain sparks are thrown at the pilot area. Over and over again push in piezzo sparker button and observe.
• Continue to hold pilot push button in to allow sufficient time to slowly emit all the air out of the gas line.
• Check for the Pilot assembly. It may be clogged.

• 1. Pilot Does Not Light ?
• 2. Pilot Lights, But Goes Out When Pushbutton is Released?
• 3. Pilot Goes Out During or After Hot Water Use ?
• 4. Pilot Is On, But Burners Do Not Light With Water Flow ?
• 5. Hot Water Temperature Fluctuates at Tap ?
• 6. Water Is Too Hot ?
• 7. Water Is Not Hot Enough ?
• 8. Burners Do Not Burn Cleanly; Yellow Flames When Operating ?